IP20 / Indoor
5mm Ultra-Slim System
An ultra-thin architectural line for accent, supplementary, decorative and ambient lighting. It is not the first choice for main lighting in a large space.
View the 5mm System
Complete System / One Supplier
Complete Magnetic LED Track Lighting Systems
KingOrnan matches track rails, LED light modules, power supplies, connectors and controls around your project - so every part works together before it reaches the site.
- 24V / 48V low-voltage options
- Multiple light modules on one compatible track
- DALI, Zigbee, Bluetooth Mesh and other controls
- OEM / ODM support
13+ YearsLED lighting development and manufacturing experience
50,000+ m²Approximate combined production area across our specialist factory network
Multiple PlatformsIndependent track families for different project needs
S24 IP65The complete 24mm family is designed for balconies and other outdoor areas
One BOMTrack, lights, power and accessories checked together
Easier to Source
One matched system reduces on-site surprises
A magnetic track lighting system is more than a rail and a fixture. Its mechanical interface, voltage, power feed, connectors and controls must be selected as one system.
KingOrnan checks the fixture mix, power supply, track and accessories before production. The approved specification becomes the reference for samples, bulk orders and future repeat orders.
- One supplier for track, light modules, power supplies, connectors and controls
- Configuration review before production
- Consistent reference from sample to repeat order
- OEM / ODM, replacement and project-extension support
Choose the Platform First
Find the right track system for your project
Different widths use different fixtures, adapters, contacts and accessories. Products from separate system series should not be mixed unless compatibility is confirmed.
System selection rule: choose the track platform first, then select the compatible light modules, power supply, connectors and controls within that series.
S10 / 10mm / DC48V
S10 10mm Slim System
A 10mm-wide DC48V platform with recessed, trimless and suspended track options for clean architectural installations.
View Magnetic Track Catalogs
IP20 / Indoor
20mm Magnetic Track System
A mature mainstream platform with a broad range of spot, grille, linear, wall-wash, pendant, framing, connector and smart-control options.
View the 20mm System
20mm / S20 / 48V
S20 Three-Sided Glowing Track
A three-sided illuminated track that adds soft ambient light while its lower channel accepts KingOrnan 20-series magnetic fixtures. Available for suspended or surface-mounted layouts.
View the S20 System S24 / 24mm / DC48V / IP65
S24 IP65 System
An IP65 DC48V magnetic track system for balconies and suitable outdoor areas, with coordinated tracks, fixtures, drivers and accessories.
View Magnetic Track Catalogs
26mm / MT26
MT26 Woven Track System
A flexible 26mm platform for specific product and project needs. Select its fixtures, woven track and accessories as one MT26 system.
View the MT26 SystemBuild the Complete System
Select the modules for each lighting task
After choosing the platform, combine only the compatible rails, luminaires, power and accessories available for that system. Click any module to browse the magnetic-light collection.
Linear / Flood Lights
Wider distribution for main, general and ambient lighting.
Grille Lights
Deep-set optical cells for comfortable directional light.
Track Spotlights
Focused light for products, artwork, tables and feature walls.
Wall-Wash Options
Strengthen vertical lighting for shelving and display walls.
Pendant Lights
Add a decorative layer above tables, bars and counters.
Zoom / Framing Lights
More precise control for displays, artwork and focal points.
Remote Power Supplies
External drivers for accessible ceiling or cabinet installation.
In-Track Power Supplies
100W, 200W, 300W and up to 400W solutions are available.
I / L / T / X Connectors
Extend runs, turn corners and build multi-direction layouts.
New Product / Lighting + Audio
Add audio to the same architectural track
The KingOrnan Track Bluetooth Speaker brings background music into compatible low- or high-voltage track systems - without adding a separate wall or ceiling mounting system.
Its Host/Sub architecture can synchronize multiple speakers or create up to three independent audio groups for homes, hotels, cafes, stores, showrooms and offices.
20WFull-range speaker power
V5.4Bluetooth connection
3 GroupsIndependent Host/Sub zones
System Benefits
Lighting that adapts without rebuilding the ceiling
Mix the light layers you need today, then reposition or replace compatible modules as the room or display changes.
Mix Modules
Combine spot, linear, flood and pendant lights on one compatible platform.
Layer the Lighting
Create general, accent, wall-wash and decorative light in one system.
Low-Voltage Options
Use compatible 24V or 48V DC platforms for flexible configurations.
Easier Maintenance
Magnetic mounting makes modules easier to install, remove and replace.
No New Ceiling Holes
Reposition fixtures along the track as the layout changes.
Cleaner Lines
Slim and trimless systems integrate more quietly into the ceiling.
One Matched BOM
Tracks, modules, power and accessories are checked as a complete set.
Smart Control
Select basic switching, dimming or compatible smart-control options.
Installation
Match the track to the ceiling and construction stage
KingOrnan configures recessed, surface-mounted and suspended systems around the ceiling structure and desired finish.
Trimless Recessed / Pre-Drywall
For new construction. The profile is secured before gypsum boards are closed, allowing the boards to overlap the flanges and support a clean trimless finish.
Plaster-In / Mud-In / Post-Drywall
For completed gypsum-board ceilings or renovations. A slot is cut, the track is fixed and its flanges are finished with joint compound.
Surface-Mounted Track
A practical option when recessed installation is not suitable, with less ceiling modification required.
Suspended Track
For high ceilings and open-ceiling layouts, bringing light closer to the working area while retaining layout flexibility.
Engineering Choices
Layout, power and control configured together
A reliable system plan connects the ceiling geometry with the electrical load and the level of control the project requires.
Track Layout
Configured around the room and lighting zones
Standard 1m, 2m and 3m track sections can be cut or joined into linear, parallel, L, T, X, rectangular, curved or wall-to-ceiling arrangements with the compatible connectors for the selected platform.
- Linear / Parallel
- L / T / X Shape
- Rectangle
- Curved / Custom
Power & Driver
Size one system power supply for the connected load
KingOrnan offers 24V or 48V in-track and remote power options in 100W, 200W, 300W and up to 400W. In a typical space, one correctly sized power supply can serve one track system assembled from 1m, 2m or 3m sections. The final selection follows the total fixture load, track length, feed position and system rating.
- In-track or remote driver
- 100W / 200W / 300W / 400W
- Recommended ≤80% working load
- Feed-point and voltage-drop check
Example load calculation
2 × 18W grille lights1 × 12W spotlight1 × 25W flood light1 × 20W speaker
Total connected load: 93W. A 100W driver can meet the load requirement, but it would operate at 93% load. For greater operating headroom and longer-term reliability, we recommend a 200W driver.
The 200W recommendation keeps the system comfortably below the preferred 80% working-load target and leaves practical capacity for later adjustment.
Smart Control
Choose track-wide, group or individual control
Depending on the selected platform and driver, options can include ON/OFF, dimming, 0–10V, DALI, Zigbee, Bluetooth Mesh, Casambi or Tuya-based solutions.
- Groups and scenes
- Schedules
- Brightness / supported CCT
- Voice ecosystem options
Project BOM & Compatibility
Send the drawing. Get the complete system plan.
Before you buy, KingOrnan can review the track, modules, power, connectors, accessories and control configuration together.
Send the requirement
CAD, PDF, BOQ, JPG, product list or a simple hand-drawn layout.
Check the system
Track, light modules, power supply, feeds, connectors, accessories and controls.
Receive the complete BOM
Review the configuration and quantities to reduce missing or mismatched parts.
Get the quotation
Pricing is based on the confirmed system configuration.
Quality & QC
Similar shapes can deliver very different long-term results
Materials, conductor quality, thermal design, electrical components and process control all affect how a magnetic track system performs over time.
For existing stock from another supplier, KingOrnan can review track drawings, cross-sections, voltage, contact position, polarity and control protocol. A physical sample remains the most reliable compatibility check.
Pure Copper Conductors by Default
Magnetic tracks use high-conductivity pure copper strips as the standard solution. Brass is available for economy-oriented configurations.
Substantial 20mm Grille Housings
Many 20mm-series magnetic grille-light bodies are specified at about 300g/m. Exact weight varies with product type and length and is confirmed in the model sheet.
Named Components as Standard
KingOrnan magnetic luminaires use OSRAM LEDs and Philips drivers by default. Alternative LED and driver solutions can be customized for the project or target market.
Sample-to-Bulk Control
Approved specifications and key components become the reference for assembly, ageing, electrical checks and repeat production.
Photometric & Color Verification
Integrating-sphere testing supports the verification of output, efficacy, color temperature and color-rendering performance against the approved specification.
Ageing Check Before Shipment
Finished luminaires undergo powered ageing checks so abnormal operation can be identified before packing and shipment.
Product Resource
View Catalogs Download the Magnetic Track Lighting Catalog
Review track systems, light modules, accessories and smart solutions for product selection or a new project.
Manufacturing Connection
Specialist production across a combined 50,000+ m²
The approximate combined area covers multiple specialist factories: panel and tube lighting, track and magnetic-track lighting, LED strip production, plus tracks, aluminium profiles and related accessories.
Magnetic & Track Lighting
Tracks, fixtures, drivers and accessories coordinated as one system.
Panel & Tube Lighting
Additional commercial-lighting production for broader sourcing programs.
LED Strip Lighting
Flexible-lighting capability for decorative and architectural projects.
Profiles & Accessories
Track, aluminium extrusion and accessory support for complete delivery.
Market Connection
Meet the KingOrnan team at international exhibitions
Face-to-face conversations help us understand local channel requirements, certification needs, project expectations and opportunities for long-term cooperation.
Applications
Choose the light modules for the job
Combine general, accent, wall-wash and decorative lighting in homes, retail, hospitality, offices and changing display spaces.
Retail Stores
Use spotlights to highlight products, wall washers for displays, and linear or flood modules for general light.
Hotels
Balance comfort, atmosphere and function across rooms, corridors, restaurants and public areas.
Offices
Use linear and low-glare modules for main lighting, with zoning or smart control where needed.
Villas & Residential
Keep ceilings clean while combining spot, linear, pendant and compact cabinet-accent modules.
Showrooms
Move spotlights, adjust direction or add modules when the display changes.
Galleries & Museums
Adjust spot, zoom, framing and wall-washer modules around each display.
Restaurants & Cafes
Focus attention on tables and bars while linear or flood modules fill the ambient light.
Project Support
Turn your requirements into a complete magnetic track lighting system
Send a CAD drawing, BOQ, product list or simple layout. KingOrnan can check the track, fixtures, power supplies, connectors and control setup.
Technical Information
Specifications and certification support
Use the summary below for initial selection, then confirm the exact model, configuration and market requirements before ordering.
TAB 1
Check the key specifications for each system
These values are a general product-family guide. Detailed track dimensions, fixture wattages, optics, drivers and control compatibility vary by series and model.
| System Series | 5mm / S10 10mm / 20mm, including S20 glowing track / S24 24mm / MT26 |
|---|---|
| IP Rating | S24 24mm series: IP65 across all configurations; other listed systems: mainly IP20 |
| Voltage | 24V / 48V, depending on series; S10, S20 and S24: DC48V |
| Standard Track Length | 1m / 2m / 3m for conventional systems; S20 glowing track: 645 / 1245 / 1845mm |
| Power Supply | In-track or remote; 100W / 200W / 300W / up to 400W, depending on system |
| Installation | Recessed, surface-mounted or suspended, depending on series; S20: surface-mounted or suspended |
| Fixture Types | Depends on the selected series; S20 accepts KingOrnan 20-series fixtures |
| LED / Driver | OSRAM LED and Philips driver by default; custom solutions available |
| CCT / CRI / Beam | 3000K / 4000K / 6000K or Smart 3000K–6000K, CRI ≥90 |
| Control | Depends on series, driver and control architecture; S20 supports synchronized or independent track / fixture control with the matching power solution |
| Warranty | Depends on model and target market |
Important: each track width has its own fixtures and accessories. Different platforms cannot be mixed directly.
TAB 2
Selected certificates and market-specific support
The examples below show part of KingOrnan's available certification documentation. Contact the sales team for other certificates or test reports. After the exact system, model and target market are confirmed, KingOrnan can verify existing coverage and assist with obtaining the matching certification required for that market.
Representative CE-LVD documentRepresentative certification documentRepresentative CE documentNeed certification for your market?Ask the sales team for the available certificate, test report and covered-model list. We can also check or assist with the certification route required by your local market.
FAQ
Magnetic track lighting questions
Answers for initial sourcing and system planning. Final decisions should be based on the confirmed model and complete project configuration.
Are magnetic track lights with different track widths interchangeable?
No. The 5mm, 10mm, 20mm, 24mm and 26mm ranges are independent platforms. Their adapters, internal structures, electrical contacts and accessories may differ. Use products matched to the same system series. Within the confirmed KingOrnan 20-series family, S20 glowing track is designed to accept 20-series light modules.
Which magnetic track system is suitable for main lighting?
It depends on the space, target illumination and fixture wattage. The ultra-slim 5mm system is better suited to supplementary, accent and decorative lighting. The 10mm and 20mm systems offer broader fixture selections for a complete room-lighting plan.
What is the S20 glowing magnetic track?
S20 is a new 48V member of the 20-series family. Three diffuser faces around its Ø60mm cylindrical body provide soft ambient light, while the lower magnetic opening accepts KingOrnan 20-series fixtures. Available track versions are 12W / 645mm, 24W / 1245mm and 36W / 1845mm. The glowing track's own wattage must be included when calculating the complete system load.
Which magnetic track system is rated IP65?
The complete S24 24mm product family is designed as an IP65 magnetic track system for balconies and other suitable outdoor environments. Its dedicated product page and detailed model documentation are in preparation.
How many lights can be installed on one track?
There is no universal fixed number. Add the wattage of every connected luminaire and accessory, then select the power supply with enough margin while checking the selected track and connector ratings. Standard 1m, 2m and 3m tracks can be joined; one correctly sized power supply is generally enough for one track system in one space.
How much spare power-supply capacity is recommended?
Keep the connected load at or below about 80% of the power-supply rating where practical. For example, 2 × 18W grille lights + 12W spotlight + 25W flood light + 20W speaker = 93W. A 100W driver can meet this load requirement, but it would operate at 93% load, so we recommend a 200W driver for greater headroom and longer-term reliability. When using S20, also include the glowing track's own 12W, 24W or 36W load.
Are 48V magnetic track lights from different suppliers compatible?
Not always. A common voltage does not guarantee the same mechanical fit, contacts, polarity or control protocol. Established 20mm systems can offer broader cross-supplier compatibility, but verification is still required. A physical sample is the most reliable check.
Can spotlights, linear lights and pendants share one track?
Yes, when they belong to the same platform and have compatible voltage, contacts and controls. Their total wattage must remain within the ratings of the track, connectors and power supply.
Does DALI or Zigbee mean every light can be controlled individually?
Not necessarily. Individual addressing requires compatible fixture drivers, controllers, gateways and correct system commissioning. Confirm whether the project needs track-wide, group or individual control before production.
Can I test samples before bulk purchasing?
Yes. Samples can be checked for track fit, electrical contact, optical performance, CCT, CRI, dimming, smart control and complete-system compatibility. The approved sample and specification can then become the production reference.
What payment methods are available?
KingOrnan can support T/T, L/C and other agreed methods. Specific terms are confirmed during quotation according to order value, customization and the cooperation arrangement.
What is the MOQ for magnetic track lights?
The standard reference MOQ for magnetic track-light systems is 50 pieces. MOQ for other lighting product families can be different, and special finishes, drivers, packaging or OEM requirements may affect the final quantity.
What is the lead time for an order?
Lead time depends on stock, order size, packaging, OEM requirements and special specifications. KingOrnan will confirm the production schedule after the final configuration is approved.
Get a Project Proposal
Tell us what you need
You do not need every model number to start. Complete this short brief and send it directly to the KingOrnan sales team.
Prepare If Available
Send any useful project material
- CAD drawing or reflected ceiling plan
- BOQ or product list
- Ceiling and installation photos
- Target market and certification needs
- Preferred control method
- Required delivery timeline
Magnetic Lighting Guides
Plan the system with more confidence
A successful magnetic track lighting project starts with three questions: how the system works, what each fixture should light, and which control architecture fits the building. These practical guides cover all three.
Guide 01
What Is a Magnetic Track Lighting System and How Does It Work?
A magnetic track lighting system combines a powered low-voltage track with interchangeable light modules. Magnetic attraction holds each compatible fixture in position while electrical contacts connect it to the conductors inside the track. The result is a clean lighting infrastructure in which spotlights, linear lights, grille lights, floodlights and pendants can be moved or replaced as the room layout changes.
The complete system is more than the visible light fixture. It includes the track profile, magnetic luminaires, power supply, electrical feeds, straight or corner connectors and the accessories required for recessed, surface-mounted or suspended installation. These parts must belong to the same compatible platform; products from different magnetic track systems should not be mixed simply because their nominal voltage or width appears similar.
- Track and conductors: distribute low-voltage power along the lighting route.
- Magnetic light modules: provide general, accent, wall-wash or decorative light.
- Power supply: converts the incoming mains supply for the selected track system.
- Connectors and mounting parts: complete straight runs, corners and installation details.
The main advantage is flexibility: the installer can build one continuous visual language while the designer adjusts fixture position, beam direction and light distribution later. Read our full system guide for a deeper explanation of components, installation methods, benefits and common applications.
How to Choose Magnetic Track Lights for Main, Accent and Decorative Lighting
Do not begin by choosing the fixture shape. Begin with the lighting task. Most complete schemes combine three layers: main lighting for useful ambient brightness, accent lighting for visual hierarchy, and decorative lighting for atmosphere and identity. Magnetic track lights make those layers easier to coordinate because several luminaire types can share one compatible track platform.
1. Main lighting
Main lighting should deliver comfortable, usable illumination throughout the occupied area. Linear modules, wide-distribution floodlights and low-glare grille lights are common choices because they spread light more evenly than a narrow spotlight. Review the required illuminance, mounting height, spacing, beam distribution and glare—not wattage alone. In an office, retail aisle or living area, an orderly module layout usually feels calmer and avoids bright patches beside dark zones.
2. Accent lighting
Accent lighting directs attention to merchandise, art, tables, architectural finishes or feature walls. Magnetic spotlights, zoom spotlights, framing lights and wall washers give more control over beam position and contrast. Match the beam angle to the target size and throw distance: a narrow beam isolates a small object, while a wider beam suits a larger display. Check aiming angles early to reduce glare and unwanted shadows.
3. Decorative lighting
Decorative lighting gives the ceiling and room a recognizable character. Pendants can lower the visual focal point above a counter or table, while illuminated track and special modules can become part of the architecture itself. Decorative light should support the main and accent layers rather than compensate for insufficient general illumination. Keep the color temperature, finish and proportions consistent across the project.
| Lighting layer | Typical magnetic fixtures | Key selection factors | Common mistake to avoid |
|---|---|---|---|
| Main lighting | Linear, flood and low-glare grille modules | Lumen output, distribution, spacing, mounting height, glare and target illuminance | Using only narrow-beam spotlights and creating uneven pools of light |
| Accent lighting | Adjustable spot, zoom, framing and wall-wash modules | Beam angle, aiming flexibility, throw distance, target size and contrast ratio | Choosing beam angle by appearance before checking the object and installation distance |
| Decorative lighting | Pendants, illuminated track and specialty modules | Scale, visual rhythm, finish, color temperature and relationship to the interior | Prioritizing visual effect while overlooking useful light and system load |
Specify the system in the right sequence
After defining the lighting layers, select the platform and installation method: recessed, trimless recessed, surface-mounted or suspended. Then confirm fixture types, output, beam angle, color temperature and color rendering. For retail, hospitality and residential projects where material colors matter, a higher CRI option can improve visual quality, but it should be evaluated together with efficacy, consistency and project budget.
Next, calculate the complete electrical load, including every light and any powered accessory such as a Bluetooth speaker. For example, two 18 W grille lights, one 12 W spotlight, one 25 W floodlight and one 20 W speaker total 93 W. A 100 W driver can meet that load requirement, but it would operate at 93% load. KingOrnan therefore recommends a 200 W driver for greater operating headroom and longer-term reliability. Track runs can be joined into the planned layout, and one correctly sized power supply can serve one compatible track system within the space.
Finally, decide whether simple switching, dimming, DALI, Zigbee or Bluetooth Mesh control is required. Confirm the matching drivers, controllers and gateways before ordering the bill of materials. If the project is still at concept stage, send us the ceiling plan, room dimensions, target market and preferred control method. Our team can help prepare a compatible fixture mix and preliminary system proposal.
Guide 03
DALI vs Zigbee vs Bluetooth Mesh for Magnetic Track Lighting
The best lighting control method depends on the building infrastructure, project scale, commissioning plan and required user experience. DALI, Zigbee and Bluetooth Mesh can all support dimming, grouping and scene control, but they do not use the same communication architecture or interchangeable components.
DALI is a wired, addressable lighting-control approach often selected for professional commercial projects that need defined groups, scenes, schedules and integration with a wider building strategy. It offers precise control but requires compatible DALI drivers, control devices and planned cabling and commissioning.
Zigbee is a low-power wireless mesh protocol commonly used with a gateway or hub. It can suit smart-home and commercial lighting projects where flexible wireless grouping and ecosystem integration are priorities. Bluetooth Mesh also lets compatible devices relay messages across the network and can work well for app-based smart lighting in residential and small-to-medium commercial spaces.
Choose the control architecture before finalizing the magnetic fixtures and power system. Drivers, controllers, gateways, wall panels and software must be matched to the selected platform and project requirements. Our detailed smart-home technology guide compares these options with Wi-Fi, Matter, RF and 0/1–10 V control.
